Heating, Ventilation, and Air Conditioning
Photo Sensor Repair Procedures
In this manual: Heating, Ventilation, and Air Conditioning
7steps
~42min
2/5difficulty
Done 0 of 7
Inspection
- Ignition switch ON
- Using a scan tool.
- Direct intense light onto the photo sensor using a lamp, and check the change in output voltage.
- The voltage will increase with more intense light and decrease with less intense light.

1. Photo sensor ground
2. 5 V DC
3. Photo sensor signal4. -
5. Photo sensor (+)
6. Photo sensor (-)
Replacement
- Disconnect the negative (-) battery terminal.
- Using a flat-blade screwdriver (-), remove the photo sensor (A) from the center of the defrost nozzle.

- Install in the reverse order of removal.
Test yourself
A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?