Hyundai Tucson LM Quiz
Body (Interior and Exterior)

Fender Repair Procedures

In this manual: Body (Interior and Exterior)
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
7steps
~42min
2/5difficulty
Done 0 of 7

Replacement
  • An assistant is required when removing and installing the hood.
  • Be careful not to damage the hood and body.
  • When removing the clips, use a clip remover.
  1. Remove the front bumper. (Refer to Bumper - "Front Bumper")
  2. Loosen the fender splash shield screws.
  3. After loosening the fastening screws and clips, remove the side sill garnish (A).
  4. After loosening the fastening screws, remove the front bumper side mounting bracket (A).
  5. Using a screwdriver, remove the fender side cover (B).
  6. After loosening the fastening bolts, remove the fender (A).
  7. Install in the reverse order of removal.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.