Body (Interior and Exterior)

Mirror Repair Procedures

9steps
~54min
2/5difficulty
0102030405010.88N·mlb·ft
Tightening torque found on this page
Done 0 of 9

Replacement

Outside Rear View Mirror Assembly Replacement
  • Using a flat-tip screwdriver, wrap protective tape around the tip and apply protective tape around the relevant parts to prevent damage.
  • Wear gloves to protect your hands.
  1. Using a screwdriver, remove the inner quadrant cover (A).
  2. Disconnect the connector (A), then remove the outside rear view mirror (B).

    Tightening torque: 6.9 ~ 10.8 N·m

  3. Install in the reverse order of removal.
Inside Rear View Mirror Assembly Replacement

Mirror Replacement

  1. Press down on the base of the inside rear view mirror (A) to remove the inside rear view mirror assembly (B).
  2. Install in the reverse order of removal.

ECM Mirror Replacement

  1. Using a screwdriver, remove the ECM mirror cover (A).
  2. Disconnect the connector (A).
  3. Loosen the mounting screw (C), then press up on the base of the ECM mirror to remove the ECM mirror assembly (B).
  4. Install in the reverse order of removal.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.