Exterior Lights

Turn Signal and Stop/Tail Lamp

1. Open the tailgate.

2. Loosen the lamp assembly mounting screws using a Phillips screwdriver.

3. Remove the rear combination lamp from the vehicle body.

4. Remove the socket from the assembly by turning it counterclockwise until the tabs on the socket align with the grooves in the assembly.

5. Remove the bulb from the socket by pressing it in and turning it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.

6. Insert the new bulb into the socket and turn it until it locks in place.

7. Install the socket into the assembly, aligning the socket protrusions with the assembly grooves.

Insert the socket into the assembly and turn the socket clockwise.

8. Install the rear combination lamp assembly to the vehicle body.