Interior Light

Back-Up Light and Rear Light

1. Open the tailgate.

2. Remove the service cover using a flat-blade screwdriver.

3. Remove the socket from the assembly by turning the socket counterclockwise until the protrusions on the socket align with the slots in the assembly.

4. Rear lamp: Remove the bulb from the socket by pressing it and turning it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.

Back-up lamp: Remove the bulb from the socket by pulling it out.

5. Insert a new bulb into the socket.

6. Install the socket into the assembly by aligning the tabs on the socket with the grooves in the assembly and turning the socket clockwise.

7. Install the lamp assembly onto the vehicle body.