Underbody Maintenance

Corrosive materials used for de-icing and dust control can accumulate on the underbody. If these materials are not removed, accelerated rusting may occur on underbody parts, such as fuel lines, frame, floor pan and exhaust system, even though they have been treated with rust protection.

Thoroughly wash the underbody of the vehicle and the wheel wells with warm or cold water. Rinse once a month, after off-road driving, and at the end of each winter. Pay special attention to these areas, because it is difficult to see all the mud and dirt. Wetting road dirt without removing it will do more harm than good.

The lower edges of the doors, rocker panels and frame members have drain holes that must not be allowed to become clogged with dirt; water trapped in these areas may cause rust.

WARNING

After washing the vehicle, test the brakes at low speed to check whether they have been affected by water. If braking performance has decreased, dry the brakes by applying them lightly while maintaining a slow forward speed.