Check 2-2: Fuel Level Warning Inspection

• Remove: Fuel Tank (see Fuel Tank Removal in the Fuel System (DFI) chapter)
• Connect the resistor(s) [A] (about 50 to 100 Ω) between the fuel pump connector terminal [B] of the main harness side and the battery negative (–) terminal [C] as shown.

• Turn the ignition switch to ON.
• After about 5 seconds, the meter indicate the following.

For ZX1000J Model

Fuel Level Warning Indicator Light (LED) [A] goes on “FUEL” blinks [B]

For ZX1000K Model

Warning Indicator Light (Yellow LED) [C] goes on FUEL Warning Symbol goes on “FUEL” blinks [B]

If the display and indicator light (LED) function does not work, replace the meter unit.