Kawasaki Ninja ZX-10R Quiz
Electrical System

Check 2-3: Intake Air Temperature Inspection

In this manual: Electrical System
General Information — 26Periodic Maintenance — 66Fuel System (DFI) — 79Cooling System — 28Engine Top End — 51Clutch — 24Engine Lubrication System — 28Engine Removal/Installation — 5Crankshaft/Transmission — 65Wheels/Tires — 22Final Drive — 17Brakes — 54Suspension — 36Steering — 17Frame — 40Electrical System — 104Self-Diagnosis System — 112Appendix — 10
~1min read
  • Disconnect the intake air temperature sensor connector [A] (see Intake Air Temperature Sensor Removal in the Self-Diagnosis System chapter).
  • Connect the variable rheostat [B] to the R/BK lead [C] and BR/BK lead [D] terminals.
Check 2-3: Intake Air Temperature Inspection

  • Turn the ignition switch to ON.
  • Read the temperature in the display

The display range is –20 ∼ 140В°C (–4 ∼ 284В°F).

If the temperature is out of the range, the indication fixes the minimum value or maximum value.

When the speed is 20 km/h or less and rising the temperature, the indication fixes the value of just before the indication.

If the display function does not work, check the wiring (see Meter Unit Circuit).

If the wiring is good, replace the meter assembly.

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.