Kawasaki Ninja ZX-10R Quiz
Electrical System

Check 3-7 Stop Watch Inspection

In this manual: Electrical System
General Information — 26Periodic Maintenance — 66Fuel System (DFI) — 79Cooling System — 28Engine Top End — 51Clutch — 24Engine Lubrication System — 28Engine Removal/Installation — 5Crankshaft/Transmission — 65Wheels/Tires — 22Final Drive — 17Brakes — 54Suspension — 36Steering — 17Frame — 40Electrical System — 104Self-Diagnosis System — 112Appendix — 10
~1min read
  • Connect the leads in the same circuit as Check 3-2.
  • By pushing the upper button each time to set the stop watch mode.
  • Connect the insulated auxiliary lead processed insulation to the terminal [13] as shown in the figure, then stop watch start to count.
  • While count the stop watch, connect the auxiliary lead to the terminal [14] as shown in the figure, then indicate the counted lap time during 10 seconds.

If the display function does not work, replace the meter unit.

Check 3-7 Stop Watch Inspection

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.