Check 3-1: CAN Communication Line Resistance Inspection

• Set the hand tester [A] to the ×1 Ω range and connect it to the terminal [11] and [12] in the meter unit.

Special Tool - Hand Tester: 57001-1394

CAN Communication Line Resistance (at Meter Unit) Standard: 122 126 Ω

If the tester reading is not specified, replace the meter unit.

Check 3-2: Meter Unit Power Supply Check

• Using the auxiliary leads, the 12 V battery to the meter unit connector as follows.

Connect the battery positive (+) terminal to the terminal [1] [9].

Connect the battery negative (–) terminal to the terminal [3].

• Check the following items.

The all LCD segments [A] appear for 3 seconds.

The tachometer (LED) [B] blinks 3 times.

For ZX1000J model, the fuel level warning indicator light (LED) [C] and warning indicator light (Red LED) [D] go on.

For ZX1000K model, the ABS indicator light (LED) [C] and warning indicator light (Red LED) [D] go on.

The following items blinks.

Power Mode Indicator [E] S-KTRC Mode indicator [F] “FUEL” Segment [G] Fuel Level Warning Symbol [H] (ZX1000K model)