Rear Wheel Rotation Sensor Removal

NOTICE

The wheel rotation sensor should be handled carefully, never struck sharply, as with a hammer, or allowed to fall on a hard surface since the wheel rotation sensor is precision made. Be careful not to get water or mud on the wheel rotation sensor.

Do not try to disassemble or repair the wheel rotation sensor.

• Remove: Fuel Tank (see Fuel Tank Removal in the Fuel System (DFI) chapter) Connector [A] (Disconnect)

• Clear the sensor lead from the clamp [A].

• Clear the sensor lead from the clamps [A].
• Remove: Bolt [B] Rear Wheel Rotation Sensor [C]