Wheel Rotation Sensor Rotor Inspection

• Remove: Wheels (see Front/Rear Wheel Removal in the Wheels/Tires chapter) Brake Disc Mounting Bolts [A] Sensor Rotor [B] Front Wheel [C] Rear Wheel [D]

• Visually inspect the wheel rotation sensor rotor.

If the rotor is deformed or damaged (chipped teeth [A]), replace the sensor rotor with a new one.

If there is iron or other magnetic deposits [B], remove the deposits.

• Install: Front Brake Disc [A] Front Wheel Rotation Sensor Rotor [B] Rear Brake Disc [C] Rear Wheel Rotation Sensor Rotor [D]

When installing the rear wheel rotation sensor rotor, the bended end [E] faces to disc side.

Install the brake discs (see Brake Disc Installation).

KIBS Solenoid Valve Relay Fuse (20 A) Removal

Refer to the Fuse Box Fuse Removal in the Electrical System chapter.

KIBS Motor Relay Fuse (30 A) Removal

Refer to the Fuse Box Fuse Removal in the Electrical System chapter.

Fuse Installation

If a fuse fails during operation, inspect the electrical system to determine the cause, and then replace it with a new fuse of proper amperage (see Fuse Installation in the Electrical System chapter).

Fuse Inspection

• Remove the fuses (see KIBS Solenoid Valve Relay Fuse (20 A)/KIBS Motor Relay Fuse (30 A) Removal).
• Refer to the Fuse Inspection in the Electrical System chapter.