Wheel Rotation Sensor Air Gap Inspection

• Raise the front/rear wheel off the ground (see Front/Rear Wheel Removal in the Wheels/Tires chapter).
• Measure the air gap between the sensor and sensor rotor at several points by turning the wheel slowly.

Wheel Rotation Sensor Air Gap Standard:

Front 0.4 1.6 mm (0.02
0.06 in.)

Rear 0.4 1.6 mm (0.02
0.06 in.)

NOTE

The sensor air gap cannot be adjusted.

If the air gap is not within the specification, inspect the hub bearing (see Hub Bearing Inspection in the Wheels/Tires chapter), sensor installation condition and sensor (see Wheel Rotation Sensor Inspection).