Tire (Pressure and Tread Wear)

Repair Procedures

Inspection

1. Check the tire pressure.

   Tire Pressure

   Tire	Front	Rear
   195/65 R15	230 kPa (33 psi)	230 kPa (33 psi)
   205/55 R16	230 kPa (33 psi)	230 kPa (33 psi)
   205/60 R16	230 kPa (33 psi)	230 kPa (33 psi)
   225/45 R17	230 kPa (33 psi)	230 kPa (33 psi)
   225/40 R18	240 kPa (35 psi)	240 kPa (35 psi)

Tire Rotation

Pull and Wander Test

If the steering pulls to one side, rotate the tires according to the following wheel rotation order.

1. 1

   Swap the front right and front left tires, then perform a road test to confirm vehicle stability.

   

2. 2

   If the steering pulls in the opposite direction, rotate the front and rear tires, then perform the road test again.

   

3. 3

   If the steering continues to pull to the same side, rotate the front right tire and perform the road test again.

   

4. 4

   If the steering continues to pull to one side, replace the front wheels with new ones.

   

Tire Wear

1. 1

   Measure the tire tread depth.

   Tread depth [limit]: 1.6 mm (0.0630 in.)

2. 2

   If the remaining tread depth (A) is less than the limit, replace the tire.