Kia Forte BD Quiz
Suspension System

Wheel

In this manual: Suspension System
General Information — 8Maintenance — 32Engine Mechanical System — 47Engine Electrical System — 17Emission Control System — 10Engine Control System/Fuel System — 32Clutch System — 11Manual Transmission — 11DCT (Dual Clutch Transmission) System — 16Drive Shaft and Axle — 8Suspension System — 26Steering — 9Restraints — 11Brake System — 27Body (Interior and Exterior) — 119Body Electrical System — 98Heating, Ventilation, and Air Conditioning — 27
3steps
~18min
2/5difficulty
04080120160200127.594N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Repair Procedures

Hub Nut Tightening Sequence

Tighten the hub nuts as follows.

Tightening torque: 107.9–128 N·m

Perform inspection

  1. Raise the vehicle.

  2. Measure wheel runout with a dial indicator as shown in the illustration below.

    Run out Aluminum
    Radial mm (in) Below 0.3 (0.0118)
    Lateral mm (in) Below 0.3 (0.0118)

  3. If the measured value exceeds the specified value, replace the wheel.

Test yourself

A quick Kia Forte BD quiz: every answer comes with an explanation and a link to the manual page.