Engine Mechanical System

Fly Wheel Repair procedures

5steps
~30min
2/5difficulty
030609012015088.365N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Removal and Installation

  1. Shut off the high voltage circuit.

    (Refer to Engine Mechanical System - “High Voltage Shut off Procedure”)

  2. Remove the dual clutch transmission.

    (Refer to Dual Clutch Transmission (DCT) - "Dual Clutch Transmission Assembly")

  3. Remove the engine clutch disk and clutch cover.

    (Refer to Engine Clutch System - "Clutch Cover and Disk")

  4. Remove the flywheel (A).

    Tightening torque : 78.5 - 88 N·m

  5. Install in the reverse order of removal.