Sunroof Adjustment

Check the alignment of the sliding glass (C), which is located between the front (A) and rear (B) glass, and adjust if necessary. Alignment Adjustment Standard value [mm (in.)] (1) Front edge: 0 mm (0 in.) (2) Rear edge: 0 mm (0 in.)

Adjust the glass height by slightly loosening the screws (A).

Use the sunroof emergency mode only to open or close the sunroof in case of engine malfunction.

Use a hex key to open or close the sunroof after removing the roof trim. Do not apply excessive force when opening or closing the sunroof. [Sliding glass motor]

[Shade Motor]

If necessary, reset the sunroof according to the reset procedure.