Removal and Installation of Engine Mounting

Roll Road Bracket

1. 1
   Remove the roller guide bracket (A). Tightening torque Bolt (B): 49.0 ~ 64 N·m Bolt (C): 107.9 ~ 128 N·m

   

2. 2
   Install in the reverse order of removal.

Engine Mounting Bracket

1. 1
   Place a jack against the edge of the upper oil pan to support the engine.
2. 2
   Disconnect the ground cable (A) and remove the engine support bracket (B). Tightening torque Ground line bolt: 10.8 ~ 13.7 N·m Nut and bolt: 88.3 ~ 108 N·m

   

3. 3
   Remove the coolant reservoir. (Refer to Cooling System - "Reservoir")
4. 4
   Remove the engine mounting bracket (A).

   Tightening torque: 63.7 ~ 83 N·m

   

5. 5
   Install in the reverse order of removal.

Transmission Mounting Bracket

1. 1
   Remove the air duct. (Refer to Intake and Exhaust System - Air Cleaner)
2. 2
   Remove the battery and tray. (Refer to Engine Electrical System — "Battery")
3. 3
   Remove the air cleaner assembly. (Refer to Air Intake and Exhaust System - "Air Cleaner").
4. 4
   Install the jack to the edge of the transaxle.
5. 5
   Disconnect the ground cable (A).

   Tightening torque: 10.8 ~ 13.7 N·m

   

6. 6
   Remove the service cover (A).

   

7. 7
   Remove the transmission mounting bolts (A).

   Tightening torque: 88.3 ~ 108 N·m

   

8. 8
   Remove the transaxle mounting bracket (A).

   Tightening torque: 63.7 ~ 83 N·m

   

9. 9
   Install in the reverse order of removal.