Rear Fog Lamp

1. Remove the lower cover by turning the screws.

2. Reach to the rear of the rear bumper.

3. Disconnect the power connector.

4. Remove the bulb socket from the housing by turning the socket clockwise until the tabs on the socket align with the slots in the housing.

5. Install the new socket into the lamp housing by aligning the tabs on the socket with the slots in the housing. Insert the socket into the housing and turn the socket clockwise.

6. Connect the power connector.

7. Install the rear lower cover in place.

✽ NOTICE

The rear fog lamp is on the driver's side only (5-door, if equipped).

Tail Lamp or Stop Lamp and Tail Lamp (LED)

If the lamp does not work, we recommend that the system be inspected by an authorized Kia dealer.