Specifications

Specification

Ignition System

Ignition Coil

Item	Specification
Primary Winding Resistance (Ω)	0,75 ± 15% [20 °C]
Secondary Winding Resistance (kΩ)	5,9 [20 °C]

Spark Plug

Item	Specification
Type	SILZKR6810
Gap	0.9 ~ 1.0 mm (0.0354 ~ 0.0394 in.)

Condenser

Item	Specification
Capacitance (μF)	0.47 [1 kHz]
Insulation Resistance (MΩ)	1000 [500 V DC/1 min]

Charging System

Generator [Non-ISG]

Item		Specification
Rated Voltage		13.5 V, 90 A
Operating Speed		1000 ~ 18000 rpm
Voltage Regulator		Built-in IC regulator type
Regulator Set Voltage	External Mode	Refer to the graph below
	Internal Mode	14.55 ± 0.3 V
Temperature Gradient	External Mode	0 ± 3 mV/°C
	Internal Mode	-3.5 ± 2 mV/°C

※ Regulator Voltage Adjustment (External Mode) Generator [ISG Type]

Item		Specification
Rated Voltage		13.5 V, 110 A
Operating Speed		1000 ~ 18000 rpm
Voltage Regulator		Built-in IC regulator type
Regulator Set Voltage	External Mode	Refer to the graph below
	Internal Mode	14.55 ± 0.3 V
Temperature Gradient	External Mode	0 ± 3 mV/°C
	Internal Mode	-3.5 ± 2 mV/°C

※ Regulator Voltage Adjustment (External Mode) Battery [Non-ISG Type] Except Russia

Item	Specification
Model Type	CMF45L-DIN
Cold Cranking Amps (A)	410 (SAE) / 328 (EN)
Reserve Capacity (min.)	80

Battery [Non-ISG] For Russia

Item	Specification
Model Type	CMF60L-DIN
Cold Cranking Amps (A)	550 (SAE) / 440 (EN)
Reserve Capacity (min.)	92

AGM Battery [ISG Type]

Item	Specification
Model Type	AGM 60L-DIN
Cold Cranking Amps (A)	640 (SAE) / 512 (EN)
Reserve Capacity (min)	100

Starting System

Starter [Non-ISG Type]

Item		Specification
Rated Voltage		12 V, 1.2 kW
Number of Gear Teeth		10
Output [No load, 11 V]	Amperes	Max. 95 A
	Speed	Min. 2500 rpm

Starter [ISG Type]

Item		Specification
Rated Voltage		12 V, 1.3 kW
Number of Gear Teeth		11
Performance [No Load, 12 V]	Amperes	Max. 95 A
	Speed	Min. 3400 rpm

Tightening torque

Item	N·m	kgf·m	lb-ft
Ignition Coil Mounting Bolt	9,8 ~ 11,8	1,0 ~ 1,2	7,2 ~ 8,7
Spark Plug Installation	14,7 ~ 24,5	1,5 ~ 2,5	10,9 ~ 18,1
Condenser and Hanger Bracket Mounting Nut	18,6 ~ 23,5	1,9 ~ 2,4	13,7 ~ 17,4
Alternator Mounting Bolt [12 mm (0.47 in.)]	19,6 ~ 26,5	2,0 ~ 2,7	14,5 ~ 19,5
Alternator Mounting Bolt [14 mm (0.55 in.)]	29,4 ~ 41,2	3,0 ~ 4,2	21,7 ~ 30,4
DC-DC Converter Installation Nut	3,9 ~ 5,9	0,4 ~ 0,6	2,9 ~ 4,3
Battery (+) Terminal Clamp Tightening	7,8 ~ 9,8	0,8 ~ 1,0	5,2~ 8,7
Battery (-) terminal clamp nut	3,9 ~ 5,9	0,4 ~ 0,6	2,9 ~ 4,3
Battery Hold-down Bracket Bolt	8,8 ~ 13,7	0,9 ~ 1,4	6,5 ~ 10,1
Battery Tray Mounting Bolt	8,8 ~ 13,7	0,9 ~ 1,4	6,5 ~ 10,1
Battery Sensor Cable Mounting Bolt	10,8 ~ 13,7	1,1 ~ 1,4	8,0 ~ 10,1
Starter Mounting Bolt	49,0 ~ 63,7	5,0 ~ 6,5	36,2 ~ 47,0