Kia Picanto JA Quiz
What to Do in an Emergency

Checking Tire Inflation Pressure

In this manual: What to Do in an Emergency
Your Vehicle at a Glance — 5Safety Features of Your Vehicle — 28Vehicle Specifications — 111Audio System — 4Driving Your Vehicle — 62What to Do in an Emergency — 36Maintenance — 77Specifications and Consumer Information — 8
~1min read

1. After driving approximately 7~10 km (4~6 miles, or about 10 minutes), stop in a suitable place.

2. Connect the filler hose (3) directly to the compressor (clamp side), then connect the other end of the filler hose (3) (opposite side) to the tire valve.

3. Connect the compressor to the vehicle battery using the cable and plugs.

4. Adjust the tire pressure to 230 kPa (33 psi). With the ignition on, proceed as follows.

- To increase the internal pressure: Turn on the compressor, position I. To check the current inflation pressure setting, briefly turn off the compressor.

WARNING

Do not run the compressor for more than 10 minutes, otherwise the unit may overheat and be damaged.

- To reduce the tire pressure: Press the button (9) on the compressor.

CAUTION

If the tire pressure cannot be maintained, drive the vehicle for a second time; see "Distributing the sealant". Then repeat steps 1 to 4. Use of the TMK may be ineffective if the tire damage is larger than approximately 4 mm (0.16 in).

Contact a professional workshop if the tire cannot be made serviceable with the Tire Mobility Kit. Kia recommends visiting an authorized Kia dealer/service partner.

WARNING

Tire pressure must be at least 230 kPa (33 psi). If not, do not continue driving. Call roadside assistance or a tow service.

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.