Kia Picanto JA Quiz
Restraints

Seat Belt Reminder

In this manual: Restraints
General Information — 8Maintenance — 30Engine Mechanical System — 46Engine Electrical System — 14Emission Control System — 11Engine Control System/Fuel System — 46Clutch System — 12Manual Transmission — 10Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 17Brake System — 22Body (Interior and Exterior) — 104Body Electrical System — 80Heating, Ventilation, and Air Conditioning — 17
10steps
~60min
3/5difficulty
Done 0 of 10

Components and Component Location

Components

Seat Belt Reminder (SBR) Unit

1. Seat Belt Reminder (SBR) Unit


Seat Belt Reminder (SBR) Sensor

1. Seat Belt Reminder (SBR) Sensor


Circuit Diagrams

Wiring Diagram

Repair Procedures

Replacement

Seat Belt Reminder (SBR) Unit
  1. Disconnect the negative battery terminal and wait at least three minutes before starting work.
  2. Remove the glove box housing. (Refer to Body - "Glove Box Housing")
  3. Remove the seat belt reminder (SBR) unit (B) after loosening the mounting nut (A).
  4. Disconnect the seat belt reminder (SBR) unit connector (A).
  5. Install in the reverse order of removal.
  6. Disconnect the negative battery terminal and wait at least three minutes before starting work.
  7. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly")
  8. Remove the front seat cushion cover. (Refer to Body - "Front Seat Cushion Cover")
  9. Remove the seat belt reminder (SBR) sensor (A).
  10. Install in the reverse order of removal.
Seat Belt Reminder (SBR) Sensor

Test yourself

A quick Kia Picanto JA quiz: every answer comes with an explanation and a link to the manual page.