Kia Rio: Manual Transaxle

Transaxle Model		M6CF1
Engine Type		Gasoline 1.4 MPI
Manual Transaxle Oil	Capacity	1,6 - 1.7 L
	Capacity	(0.42–0.45 U.S. gal, 1.69–1.80 U.S. qt, 1.41–1.50 Imp. qt)
	Recommended	- SAE 70W, API GL-4 · KIA-approved transmission oils: SK HK MTF 70W, SHELL SPIRAX S6 GHME 70W, GS CALTEX GS MTF HD 70W
Gear ratio	1st	3,769
	2nd	2.045
	3rd	1.370
	4th	1,036
	5th	0,839
	6th	0,703
	Provide Regression	3.700
Final gear ratio		4.267

Items	N·m	kgf·m	lbf·ft
Oil Drain Plug	58,9 - 78,5	6,0 - 8,0	43,4 - 57,8
Oil Filler Plug	58,9 - 78,5	6,0 - 8,0	43,4 - 57,8
Shift Lever Assembly Mounting Bolt	8,8 - 13,7	0,9 - 1,4	9,4 - 10,1
Control Cable Holder Mounting Nut	11,8 - 14,7	1,2 - 1,5	8,7 - 10,8
Reverse Lamp Switch	39,2 - 58,8	4,0–6,0	28,9 - 43,4
Neutral Switch	39,2 - 58,8	4,0–6,0	28,9 - 43,4
Shift Control Shaft Assembly Mounting Bolt	19,6 - 26,5	2,0 - 2,7	14,5 - 19,5
Control Cable Bracket Mounting Bolt	14,7 - 21,6	1,5 - 2,2	10,8 - 15,9
Transmission Support Bracket Mounting Bolt	58,9 - 78,5	6,0 - 8,0	43,4 - 57,8
Transmission Mounting Bracket Bolt	88,3 - 107,9	9,0 - 11,0	65,1 - 79,8
Steering Rod Bracket Mounting Bolt	49,0 - 63,7	5,0 - 6,5	36,2 - 47,0
Steering Rod Bracket Mounting Bolt	107,9 - 127,5	11,0 - 13,0	79,6 - 94,1
Roll Rod Support Bracket Mounting Bolt	49,0 - 68,6	5,0–7,0	36,2 - 50,6
Starter motor bolt	49,0 - 63,7	5,0 - 6,5	36,2 - 47,0
Bolt, Transmission Upper Mounting (TM=>ENG)	42,2 - 53,9	4,3 - 5,5	31,1 - 39,8
Bolt, Transmission Lower Mounting (ENG=>TM)	48,1 - 53,9	4,9 - 5,5	35,4 - 39,8
Bolt, Transmission Lower Mounting (ENG=>TM)	42,2 - 53,9	4,3 - 5,5	31,1 - 39,8

Item	Specified sealant
Control Shaft Assembly	Anaerobic Sealant for Flanges

Tool Name/Number	Illustration	Description
Engine mount bracket (beam) 09200-3N000		Used to support the engine assembly when removing/installing the transmission Used with support (09200-2S000) and adapter (09200-4X000)
Engine Support Bracket (Stand) A: 09200-2S000 B: 09200-2C100 C: 09200-2C200		Used to support the engine assembly when removing/installing the transaxle Used with Bar (09200-3N000) and Adapter (09200-4X000)
Engine Mount Support (Adapter) 09200-4X000		Used to support the engine assembly during transaxle removal/installation Used with rod (09200-3N000) and support (09200-2S000)
Seal Installer A: 09431-26100 (installer) B: 09231-H1100 (handle)		Used to install the differential oil seal.
Engine Mount 09221-A3100		Used to support the engine assembly when removing/installing the transaxle. Used with engine support

Engine Mount Bracket Assembly Drawing

Symptom of Malfunction	Suspected Area	Remedy
Abnormal Noise	Oil level (low)	Refill the oil after inspecting the components (oil seal, drain plug, and filler plug).
	Oil (incorrect or contaminated)	Replace the oil.
	Transaxle and engine mount condition (incorrect)	Tighten the mounting bolt to the specified torque.
	Shaft end play (incorrect)	Adjust the end play.
	Synchronizer ring (worn or damaged)	Replace the synchronizer ring.
	Gear (worn or damaged)	Replace the gear.
	Bearing (worn or damaged)	Replace the bearing.
Oil leak	Oil level (high)	Check the oil level.
	Gasket (damaged)	Replace the gasket. (Drain plug, filler plug)
	Oil seal (worn or damaged)	Replace the oil seal.
Hard shifting or unable to shift	Oil (incorrect)	Replace the oil.
	Shift fork (worn)	Replace the shift fork.
	Synchronizer ring (worn or damaged)	Replace the synchronizer ring.
	Gear (worn or damaged)	Replace the gear.
	Hub sleeve (worn or damaged)	Replace the hub sleeve.
Jumps out of gear	Shift fork (worn)	Replace the shift fork.
	Hub sleeve (worn or damaged)	Replace the hub sleeve.
	Gear (worn or damaged)	Replace the gear.
	Bearing (worn or damaged)	Replace the bearing.

Manual Transmission