Kia Rio YB Quiz
Steering

Steering Wheel

In this manual: Steering
General Information — 8Maintenance — 31Engine Mechanical System — 44Engine Electrical System — 14Emission Control System — 9Engine Control System/Fuel System — 30Clutch System — 10Manual Transmission — 10Automatic Transmission — 23Drive Shaft and Axle — 8Suspension System — 15Steering — 9Restraints — 14Brake System — 22Body (Interior and Exterior) — 115Body Electrical System — 84Heating, Ventilation, and Air Conditioning — 28
10steps
~60min
3/5difficulty
0204060801004936N·mlb·ft
Tightening torque found on this page
Done 0 of 10

Components and Component Location

Components

1. Steering Wheel
2. Lower Cover
3. Bezel		 4. Removed Switch
5. Connector

Repair Procedures

Removal

  1. Disconnect the battery negative cable.

  2. Turn the steering wheel so the front wheels face straight ahead.

  3. Remove the driver airbag module.

    (Refer to "Restraint System - Driver Airbag Module (DAB) and Clock Spring")

  4. Disconnect the clock spring connector.

  5. Loosen the bolt, then remove the steering wheel.

    Tightening torque: 44.1–49 N·m

Disassembly

  1. Loosen the steering wheel screw.

  2. Loosen the steering wheel lower cover screw.

  3. Disconnect the switch connector.

  4. Remove the bezel.

  5. Install in the reverse order of removal.

Test yourself

A quick Kia Rio YB quiz: every answer comes with an explanation and a link to the manual page.