Blade Replacement

When the wipers no longer clean properly, the blades may be worn or cracked and require replacement.

CAUTION

To avoid damaging the wiper arms or other components, do not attempt to move the wipers by hand.

CAUTION

Using a wiper blade not specified for your vehicle may cause wiper malfunction and failure.

Front Windshield Wiper Blade

Enter

1. Raise the wiper arm and turn the wiper blade assembly to release the locking clip.

CAUTION

Do not allow the wiper arm to drop onto the windshield, as it may chip or crack the windshield.

2. Squeeze the clip and slide the blade assembly down.

3. Remove it from the arm.

4. Install the wiper blade assembly in the reverse order of removal.

Type B

1. Raise the wiper arm.

2. Lift the wiper blade clip. Then pull the blade assembly down and remove it.

3. Install the new blade assembly.

4. Return the wiper arm to the windshield.

5. Turn the ignition switch to ON. The wiper arms will return to the normal operating position.

Rear Wiper Blade

1. Raise the wiper arm and pull out the wiper blade assembly.

2. Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks.

3. Make sure the blade assembly is securely installed by gently pulling on it.

To prevent damage to the wiper arms or other components, have the wiper blade replaced by a professional workshop. Kia recommends visiting an authorized Kia dealer/service partner.