Mazda 6 Quiz
Automatic transaxle

Transaxle fluid temperature (tft) sensor removal/installation

In this manual: Automatic transaxle
General information — 42Engine — 23Lubrication system — 10Cooling system — 9Fuel and emission control systems — 161Engine electrical system — 17Clutch — 21Manual transaxle — 10Automatic transaxle — 110Front and rear axles — 20Steering system — 15Braking system — 104Suspension — 34Body — 201Body electrical system — 287Heater and air conditioner systems — 89Technical data — 1Special tools — 1
~1min read
Warning
  • When the transaxle and ATF are hot, they can badly burn. Turn off the engine and wait until they are cool before replacing the ATF.

1. Remove the oil pan. (See CONTROL VALVE BODY REMOVAL.)

2. Disconnect the TFT sensor connector.

3. Remove the TFT sensor.


4. Install a TFT sensor.

5. Connect the TFT sensor connector.

6. Install the oil pan. (See CONTROL VALVE BODY INSTALLATION.)

7. Carry out the mechanical system test. (See MECHANICAL SYSTEM TEST.)

Test yourself

A quick Mazda 6 quiz: every answer comes with an explanation and a link to the manual page.