Removal and installation of the cabin blower motor

CABIN BLOWER MOTOR

REMOVAL AND REFITTING

• Remove:

• the trim at the base of the right front pillar,
• the glove box (see 'BODYWORK' chapter).

• Set aside the sound insulation located under the dashboard, on the right side.
• Fold the floor mat toward the rear.
• Remove the cabin control module (1) (3 nuts) and set it aside (Fig.32).

Fig. 32

Remove the hose (2) from the heater housing (3) (Fig.33).

Fig. 33

• Lift the tab (4), turn the blower motor (5) clockwise and remove it from the heater housing (3).
• Disconnect the connectors and remove the blower motor.

When refitting, check that the blower operates correctly.