Electrical & Power Control
Battery Current Sensor
In this manual: Electrical & Power Control
~1min read
Exploded View
Without ProPILOT ASSIST 2.1

| Battery fix frame | Battery cover | Negative cable | |||
| Battery current sensor | 12V battery | Battery fix rod | |||
| Battery fix rod clip | Battery tray | Battery positive terminal | |||
| Battery positive terminal cover | Battery terminal with fusible link | Positive cable | |||
| : N·m (kg-m, in-lb) | |||||
| : N·m (kg-m, ft-lb) | |||||
| : vehicle front |
With ProPILOT ASSIST 2.1

| Battery fix frame | Battery cover | Negative cable | |||
| Battery current sensor | 12V battery | Battery fix rod | |||
| Battery fix rod clip | Battery tray | Battery positive terminal | |||
| Battery positive terminal cover | Battery terminal with fusible link | Positive cable | |||
| : N·m (kg-m, in-lb) | |||||
| : N·m (kg-m, ft-lb) | |||||
| : vehicle front |
Removal and Installation
REMOVAL
Disconnect the battery current sensor connector
.

Remove negative cable mounting nut
, and then remove the negative cable
.

Loosen battery current sensor mounting nut
, and then remove the battery current sensor
.

INSTALLATION
Install in the reverse order of removal.
Was this page helpful?