Body Interior
Body Side Welt
In this manual: Body Interior
~2min read
Removal and Installation
REMOVAL
Front Body Side Welt
Pull the mounting part inside the vehicle to the outside of the vehicle, and then remove front body side welt.

Rear Body Side Welt
Pull the mounting part inside the vehicle to the outside of the vehicle, and then remove rear body side welt.

INSTALLATION
Align body side welt identification color
and vehicle position mark
, and then install body side welt to the vehicle.
- Front body side welt

- Rear body side welt

Install body side welt.
Pull out the lip of body side welt from each trim and cover it.
- When reusing the body side welt.
Use fingers to flip the lip of body side welt caught in the trim as shown in the figure, and then install it with body side welt to cover the trims.

- When the body side welt is new.
- Pull the tab sheet
of body side welt toward to vehicle outside as shown in the figure, and then pull the string
from lip of body side welt. 
- Pull out the string from all around the body side welt.
- Pull the tab sheet
After installation, check the condition of body side welt lip. Refer to Inspection.
Inspection
- Check that the lip
of body side welt
covers onto each trim
. 
- If the lip of body side welt does not cover onto each trim, operate installation step 3. Refer to Removal and Installation.
Was this page helpful?