Driver Controls
Both Side Headlamps (hi) Are Not Turned on
In this manual: Driver Controls
2steps
~12min
1/5difficulty
Done 0 of 2
Description
Both side headlamps (HI) are not turned ON when setting to the lighting switch HI or PASS.
Diagnosis Procedure
COMBINATION SWITCH INSPECTION
Check combination switch. Refer to Symptom Table.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning part.
CHECK HIGH BEAM REQUEST SIGNAL
With CONSULT
Select “High beam request” in “Data Monitor” mode of “IPDM E/R” using CONSULT.
With operating the lighting switch, check the monitor status.
Monitor item Condition Monitor status High beam request Lighting switch
(2ND)HI On LO Off
Is the inspection result normal?
YES>>Replace IPDM E/R. Refer to Removal and Installation.
NO>>Replace BCM. Refer to Removal and Installation.
Was this page helpful?