Front Fog Lamp Aiming Adjustment
Adjustment
PREPARATION BEFORE ADJUSTING
Before performing aiming adjustment, check the following.
Adjust the tire pressure to the specification.
Fill with fuel, engine coolant, and each oil.
Maintain the unloaded vehicle condition. (Remove luggage from the passenger compartment and the luggage room.)
Wipe out dirt on the front fog lamp.
Ride alone on the driver seat.
AIMING ADJUSTMENT SCREW
Turn the aiming adjusting screw for adjustment.
City model

: UP
: DOWNOff road model

: UP
: DOWN
AIMING ADJUSTMENT PROCEDURE
Place the screen.
Face the vehicle with the screen. Maintain 10 m (32.8 ft) between the front fog lamp center and the screen.
Start the engine. Turn the front fog lamp ON.
Adjust the cutoff line
with the aiming adjustment screw so that the distance (X) between the horizontal center line of front fog lamp (H) and cutoff line becomes 100 mm (3.94 in).
Front fog lamp light distribution on the screen

| : Cutoff line | |
| : High illuminance area | |
| H | : Horizontal center line of front fog lamp |
| V | : Vertical center line of front fog lamp |
| X | : Cutoff line height |