Exterior Lighting System Symptoms
Symptom Table
| Symptom | Possible cause | Inspection item | |
|---|---|---|---|
| Headlamp (HI) is not turned ON | One side |
|
Replace front combination lamp Refer to Removal and Installation. |
| Both sides | Symptom diagnosis “BOTH SIDE HEADLAMPS (HI) ARE NOT TURNED ON” Refer to Diagnosis Procedure. |
||
High beam indicator lamp is not turned ON [Headlamp (HI) is turned ON] |
Combination meter | Combination meter Data monitor “HI-BEAM IND” |
|
| Headlamp (LO) is not turned ON | One side |
|
Replace front combination lamp Refer to Removal and Installation. |
| Both sides | Symptom diagnosis “BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON” Refer to Diagnosis Procedure. |
||
Dipped beam indicator lamp is not turned ON [Headlamp (LO) is turned ON] |
Combination meter | Combination meter Data monitor “DIPPED BEAM IND” |
|
| Each lamp is not turned ON/OFF with lighting switch AUTO |
|
Combination switch Refer to Symptom Table. |
|
|
Light & rain sensor Refer to Component Function Check. |
||
| Parking lamp is not turned ON |
|
Replace front combination lamp Refer to Removal and Installation. | |
| Front side marker lamp is not turned ON |
|
Front side marker lamp circuit Refer to Component Function Check. |
|
| Tail lamp is not turned ON |
|
Tail lamp circuit Refer to Component Function Check. |
|
Rear side marker lamp is not turned ON (Tail lamp is turned ON) |
Rear combination lamp | Replace rear combination lamp Refer to Removal and Installation. |
|
| License plate lamp is not turned ON |
|
License plate lamp circuit Refer to Component Function Check. |
|
| Parking lamp, license plate lamp, side marker lamp and tail lamp are not turned ON | Symptom diagnosis “PARKING, LICENSE PLATE, SIDE MARKERAND TAIL LAMPS ARE NOT TURNED ON” Refer to Diagnosis Procedure. |
||
Position lamp indicator is not turned ON (Parking lamp, license plate lamp, side marker lamp and tail lamp are turned ON) |
Combination meter | Combination meter Data monitor “LIGHT IND” |
|
| Turn signal lamp does not blink | Indicator lamp is normal (All of turn signal lamp is not blinks) |
|
Turn signal lamp circuit Refer to Component Function Check. |
Indicator lamp is normal (Applicable side performs high flasher activation) |
|
||
| Indicator lamp is included |
|
Combination switch Refer to Symptom Table. |
|
Turn signal indicator lamp does not blink (Turn signal lamp is normal) |
One side | Combination meter | — |
Both sides (Always) |
|
Combination meter Data monitor “TURN IND” |
|
Both sides (Only when activating hazard warning lamp with ignition switch OFF) |
|
Combination meter Power supply and ground circuit Refer to Diagnosis Procedure. |
|
|
|
Hazard switch Refer to Component Function Check. |
|
| Stop lamp and high-mounted stop lamp are not turned ON/OFF | All of stop lamp and high-mounted stop lamp are not turned ON/OFF |
|
Stop lamp circuit Refer to Component Function Check. |
| Any of stop lamp and high-mounted stop lamp are not turned ON |
|
||
| Back-up lamp is not turned ON |
|
Back-up lamp circuit Refer to Component Function Check. |
|
| Front fog lamp is not turned ON | One side |
|
Front fog lamp circuit Refer to Component Function Check. |
| Both sides | Symptom diagnosis “BOTH SIDE FRONT FOG LAMPS ARE NOT TURNED ON” Refer to Diagnosis Procedure. |
||
Front fog lamp indicator lamp is not turned ON (Front fog lamp is turned ON) |
Combination meter | Combination meter Data monitor “FRONT FOG INDICATOR” |
|