Ventilation, Heater & Air Conditioner

Condenser

~2min read

Removal and Installation

REMOVAL

Use a refrigerant collecting equipment (for HFO-1234yf) to discharge the refrigerant. Refer to Recycle Refrigerant.

Remove front grille. Refer to the following.

  • Off road models: Removal and Installation

  • City models: Removal and Installation

Remove front bumper fascia. Refer to the following.

  • Off road models: Removal and Installation

  • City models: Removal and Installation

Remove radiator air guide upper. Refer to Removal and Installation.

Remove condenser inlet pipe. Refer to Removal and Installation.

Remove condenser outlet pipe. Refer to Removal and Installation.

Remove radiator core support. Refer to Removal and Installation.

Remove radiator air guide (RH and LH). Refer to Removal and Installation.

Disconnect refrigerant pressure sensor harness connector. Refer to Removal and Installation.

Remove mounting bolt .

Disengage fixing pawl, and then lift the condenser & liquid tank assembly upwards and remove condenser & liquid tank assembly from radiator.

: Pawl

INSTALLATION

Note the following items, and then install in the reverse order of removal.