License plate lamp circuit
Without daytime running light system
WITHOUT DAYTIME RUNNING LIGHT SYSTEM : Component Function Check 1.CHECK TAIL LAMP (RH) OPERATIONCheck that the tail lamp (RH) is turned ON.
Is the inspection result normal? YES >> GO TO 2.
NO >> Check tail lamp circuit. Refer to EXL-61, "WITHOUT DAYTIME RUNNING LIGHT SYSTEM : Component Function Check".
2.CHECK LICENSE PLATE LAMP OPERATION
CONSULT-III ACTIVE TEST
1. Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2. With operating the lighting switch, check that the license plate lamp is turned ON.
TAIL : License plate lamp ON Off : License plate lamp OFF
Is the inspection result normal? YES >> License plate lamp circuit is normal.
NO >> Refer to EXL-65, "WITHOUT DAYTIME RUNNING LIGHT SYSTEM : Diagnosis Procedure".
WITHOUT DAYTIME RUNNING LIGHT SYSTEM : Diagnosis Procedure 1.CHECK LICENSE PLATE LAMP BULBCheck the applicable lamp bulb.
Is the inspection result normal? YES >> GO TO 2.
NO >> Replace bulb.
2.CHECK LICENSE PLATE LAMP OPEN CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect IPDM E/R connector and back door opener switch connector.3. Check continuity between IPDM E/R harness connector and back door opener switch harness connector

Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace harness.
3.CHECK LICENSE PLATE LAMP GROUND OPEN CIRCUITCheck continuity between back door opener switch harness connector and ground.

Is the inspection result normal? YES >> Check corresponding bulb socket and harness. Repair or replace if necessary.
NO >> Repair or replace harness
With daytime running light system
WITH DAYTIME RUNNING LIGHT SYSTEM : Component Function Check 1.CHECK TAIL LAMP (RH) OPERATIONCheck that the tail lamp (RH) is turned ON.
Is the inspection result normal? YES >> GO TO 2.
NO >> Check tail lamp circuit. Refer to EXL-62, "WITH DAYTIME RUNNING LIGHT SYSTEM : Component Function Check".
2.CHECK LICENSE PLATE LAMP OPERATION
CONSULT-III ACTIVE TEST
1. Select “EXTERNAL LAMPS” of IPDM E/R active test item.
2. With operating the lighting switch, check that the license plate lamp is turned ON.
TAIL : License plate lamp ON Off : License plate lamp OFF
Is the inspection result normal? YES >> License plate lamp circuit is normal.
NO >> Refer to EXL-66, "WITH DAYTIME RUNNING LIGHT SYSTEM : Diagnosis Procedure".
WITH DAYTIME RUNNING LIGHT SYSTEM : Diagnosis Procedure 1.CHECK LICENSE PLATE LAMP BULBCheck the applicable lamp bulb.
Is the inspection result normal? YES >> GO TO 2.
NO >> Replace bulb.
2.CHECK LICENSE PLATE LAMP OPEN CIRCUIT 1. Turn ignition switch OFF. 2. Remove daytime running light relay. 3. Disconnect back door opener switch connector.4. Check continuity between daytime running light relay harness connector and back door opener switch harness connector.

Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace harness.
3.CHECK LICENSE PLATE LAMP GROUND OPEN CIRCUITCheck continuity between back door opener switch harness connector and ground.

Is the inspection result normal? YES >> Check corresponding bulb socket and harness. Repair or replace if necessary.
NO >> Repair or replace harness.