Exterior Lighting System Halogen type

Turn signal lamp circuit

In this manual: Exterior Lighting System Halogen type
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~2min read

Component Function Check

1.CHECK TURN SIGNAL LAMP

1. Select “FLASHER” of BCM (FLASHER) active test item.CONSULT-III ACTIVE TEST


1. Select “FLASHER” of BCM (FLASHER) active test item.

2. With operating the test items, check that the turn signal lamps is turned ON.

LH : Turn signal lamps (LH) ON RH : Turn signal lamps (RH) ON Off : Turn signal lamps OFF

Is the inspection result normal? YES >> Turn signal lamp circuit is normal.

NO >> Refer to EXL-69, "Diagnosis Procedure".

Diagnosis Procedure

1.CHECK TURN SIGNAL LAMP BULB

Check the applicable lamp bulb.

Is the inspection result normal? YES >> GO TO 2.

NO >> Replace bulb.

2.CHECK TURN SIGNAL LAMP OUTPUT VOLTAGE 1. Turn ignition switch OFF. 2. Disconnect front turn signal lamp connector, side turn signal lamp connector and rear combination lamp connector. 3. Turn ignition switch ON.

4. With operating the turn signal switch, check voltage between BCM harness connector and ground.

*1: Without Intelligent Key

*1: Without Intelligent Key *2: With Intelligent Key

Is the inspection result normal? YES >> GO TO 3.

NO >> GO TO 4.

3.CHECK TURN SIGNAL LAMP OPEN CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect BCM connector.

3. Check continuity between BCM harness connector and front turn signal lamp, side turn signal lamp or rear combination lamp harness connector.

Front turn signal lamp

Side turn signal lamp

Side turn signal lamp

Rear turn signal lamp

Rear turn signal lamp

*1: Without Intelligent Key

*1: Without Intelligent Key *2: With Intelligent Key

Is the inspection result normal? YES >> GO TO 5.

NO >> Repair or replace harness.

4.CHECK TURN SIGNAL LAMP SHORT CIRCUIT

Check continuity between BCM harness connector and ground.

*1: Without Intelligent Key

*1: Without Intelligent Key *2: With Intelligent Key

Is the inspection result normal?

YES >> Check each bulb socket for internal short circuit, and if check result is normal, replace BCM. Refer to BCS-93, "Removal and Installation" (with Intelligent Key), BCS-161, "Removal and Installation" (without Intelligent Key).

NO >> Repair or replace harness.

5.CHECK TURN SIGNAL LAMP GROUND OPEN CIRCUIT

Check continuity between BCM harness connector and front turn signal lamp, side turn signal lamp or rear combination lamp and ground.

Front turn signal lamp

Side turn signal lamp

Side turn signal lamp

Rear turn signal lamp

Rear turn signal lamp

Is the inspection result normal?

Is the inspection result normal? YES >> Check corresponding bulb socket and harness. Repair or replace if necessary.

NO >> Repair or replace harness.