Light & rain sensor
Component Function Check
1.CHECK LIGHT & RAIN SENSOR 1. Clean light & rain sensor detection area of windshield fully. 2. Turn ignition switch ON. 3. Turn lighting switch AUTO.4. With the light & rain sensor illuminating, check the auto light function.

Is the inspection result normal? YES >> Light & rain sensor is normal.
NO >> Refer to EXL-67, "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK LIGHT & RAIN SENSOR FUSE 1. Turn ignition switch OFF.2. Check that the following fuse is not fusing.

Is the inspection result normal? YES >> GO TO 2.
NO >> Replace the fuse after repairing the applicable circuit.
2.CHECK LIGHT & RAIN SENSOR POWER SUPPLY 1. Disconnect light & rain sensor connector.2. Check voltage between light & rain sensor harness connector and ground.

Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace harness.
3.CHECK LIGHT & RAIN SENSOR GROUND CIRCUITCheck continuity between light & rain sensor harness connector and ground.

Is the inspection result normal? YES >> GO TO 4.
NO >> Repair or replace harness.
4.CHECK LIGHT & RAIN SENSOR SIGNAL 1. Connect light & rain sensor connector. 2. Turn ignition switch ON.3. Check signal between BCM harness connector and ground with oscilloscope.

*1: Without Intelligent Key *2: With Intelligent Key
Is the inspection result normal? YES >> Replace light & rain sensor.
NO >> GO TO 5.
5.CHECK LIGHT & RAIN SENSOR SIGNAL CIRCUIT FOR OPEN 1. Turn ignition switch OFF. 2. Disconnect BCM connector and light & rain sensor connector.3. Check continuity between BCM harness connector and light & rain sensor harness connector.

*1: Without Intelligent Key *2: With Intelligent Key
Is the inspection result normal? YES >> GO TO 6.
NO >> Repair or replace harness.
6.CHECK LIGHT & RAIN SENSOR SIGNAL CIRCUIT FOR SHORTCheck continuity between BCM harness connector and ground.

*1: Without Intelligent Key *2: With Intelligent Key
Is the inspection result normal? YES >> Refer to BCS-93, "Removal and Installation" (with Intelligent Key), BCS-161, "Removal and Installation" (without Intelligent Key).
NO >> Repair or replace harness.