Driver Information & Multimedia
Bose Speaker Amp
In this manual: Driver Information & Multimedia
3steps
~18min
2/5difficulty
Done 0 of 3
CHECK FUSE
Check that the following fuses are not blown:
| Terminal No. | Signal name | Fuse No. | Capacity |
|---|---|---|---|
| 10 | Battery power supply | 11 | 15 A |
| 11 | Battery power supply | 12 | 15 A |
Are the fuses blown?
YES>>Replace the blown fuse after repairing the affected circuit.
NO>>GO TO 2.
CHECK POWER SUPPLY CIRCUIT
Ignition switch OFF.
Disconnect Bose speaker amp. connector.
Check voltage between Bose speaker amp. connector and ground.
Bose speaker amp. Ground Condition Voltage
(Approx.)Connector Terminal B120 10 — Ignition switch: OFF Battery voltage 11
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace harness or connectors.
CHECK GROUND CIRCUIT
Check continuity between Bose speaker amp. connector and ground.
| Bose speaker amp. | Ground | Continuity | |
|---|---|---|---|
| Connector | Terminal | ||
| B120 | 7 | — | Yes |
| 12 | |||
Is the inspection result normal?
YES>>Inspection End.
NO>>Repair or replace harness or connectors.
Was this page helpful?