Electrical & Power Control
U0415 Vehicle Speed
In this manual: Electrical & Power Control
6steps
~36min
2/5difficulty
Done 0 of 6
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms (Trouble diagnosis content) | DTC Detection Condition | |
|---|---|---|---|
| U0415 | Nissan Murano Vehicle SPEED (Vehicle speed signal) |
Diagnosis condition | When ignition switch ON. |
| Signal (terminal) | — | ||
| Threshold | — | ||
| Diagnosis delay time | 2 seconds or more | ||
POSSIBLE CAUSE
ABS actuator and electric unit (control unit)
BCM
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
CONSULT
Erase the DTC.
Ignition switch OFF.
Select “Self Diagnostic Result” mode of “BCM”, after ignition switch ON for 2 seconds or more.
Is any DTC detected?
YES>>Refer to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
SELF DIAGNOSTIC RESULT
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “ABS”.
Check DTC.
Is any DTC detected?
YES>>Repair or replace the malfunctioning part.
NO>>Replace BCM. Refer to Removal and Installation.
Was this page helpful?