Electrical & Power Control
U1010 Control Unit(can)
In this manual: Electrical & Power Control
~1min read
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms (Trouble diagnosis content) | DTC Detection Condition | |
|---|---|---|---|
| U1010 | CONTROL UNIT(CAN) [Control unit (CAN)] |
Diagnosis condition | When ignition switch ON. |
| Signal (terminal) | — | ||
| Threshold | — | ||
| Diagnosis delay time | 2 seconds or more | ||
POSSIBLE CAUSE
BCM
FAIL-SAFE
—
Replace BCM
When DTC U1010 is detected, replace BCM.
>>Replace BCM. Refer to Removal and Installation.
Was this page helpful?