Driver Information & Multimedia

U1304 Camera Image Calibration

3steps
~18min
2/5difficulty
Done 0 of 3
DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen terms

(Trouble diagnosis content)
DTC detection condition
U1304

CAMERA IMAGE CALIB

(Camera image calibration)
Diagnosis condition When ignition switch is ON
Signal (terminal) —
Threshold —
Diagnosis delay time —

POSSIBLE CAUSE

Camera calibration is incomplete.

FAIL-SAFE

Unmatched icon display (red) is displayed (applicable for unmatched camera only)

DTC Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Ignition switch ON.

  2. Select “Self Diagnostic Result” mode of “AVM”.

  3. Check DTC.

Is DTC U1304 detected?

YES>>

Proceed to DTC Diagnosis Procedure.

NO>>

To check malfunction symptom before repair: Intermittent Incident.

NO>>

Confirmation after repair: Inspection End.

Diagnosis Procedure

PERFORM CALIBRATION

When U1304 is detected, perform calibration of camera image.

>>

Refer to Work Procedure.