Openings
Replacing the battery
In this manual: Openings
~1min read
Battery ref.: CR1620 / 3 volts.
To replace the battery, release the case using a coin at the notch.

If the remote control does not work after replacing the battery, carry out a reset procedure.
Resetting
- Switch off the ignition.
- Switch the ignition on again.
- Immediately press the lock button on the remote control for a few seconds.
- Switch off the ignition and remove the remote control key from the immobiliser. The remote control is operational again.
Test yourself
A quick Peugeot 407 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?