Sliding rear seat

To move forward or back

To unlock the seat:

• from the rear seats, lift one of the levers 1;
• from the luggage compartment, operate handle 2.

Slide the seat forward or back to the desired position.

Release lever 1 or handle 2 and make sure the seat is properly locked.

When operating the rear seats, make sure nothing is obstructing the anchorages (body parts, animal, gravel, cloth, toys, etc.).

For safety reasons, make these adjustments with the vehicle stationary.

To fold down the backrest

Make sure the front seats are moved sufficiently forward.

Lower the head restraints fully.

Place the seat belts in their guides A.

Lift handle 3 and lower backrest B.

Before handling the backrest, place the belt in belt guide A to prevent it from being damaged.

To raise the seatback, proceed in the reverse order.

Raise the seatback and click it into its support.

For safety reasons, make these adjustments with the vehicle stationary.

In the two-seat bench configuration, with the small backrest B folded down, the centre seating position must not be used, as the seat belt cannot be fastened (belt buckles inaccessible).

When operating the rear seats, make sure nothing is obstructing the anchorages (body parts, animal, gravel, cloth, toys, etc.).

When returning the backrest to position, make sure it is properly locked.

If seat covers are used, make sure they do not prevent the backrest from locking.

Make sure the belts are correctly positioned.

Reposition the head restraints.