Roof bars / Spoiler

Access to the fixing points

Open the doors. Behind seal 2 are the blanking screws 1, which protect the locations for the mounting screws.

When fitting the roof bars, replace the blanking screws with the mounting screws supplied with the roof bars.

Never
remove the blanking screws 1 without covering the holes again afterwards.

Precautions for use

Operating the tailgate

Before operating the tailgate, check the objects and/or accessories (bicycle carrier, roof box, etc.) fitted to the roof bars: they must be properly positioned and secured, and their size must not prevent the tailgate from operating correctly.

To choose equipment suited to your vehicle, we recommend consulting a brand representative.

For fitting the bars and conditions of use, refer to the manufacturer's fitting instructions.

It is recommended to keep these instructions with the other vehicle documents.

Permitted load on the roof rack: 80 kg (including the carrying system).

Spoiler

It is forbidden to fix objects and/or accessories (bicycle carriers, etc.) resting on spoiler A.

When
the original roof bars, approved by our technical department, are supplied with screws, use only these screws to fix the roof bars to the vehicle.