Starting procedure
Before starting, the vehicle must not be connected to the electricity supply network and the charging flap must be properly closed.
To start:
- Set the drive selector to N or P
- Switch the ignition on (key in position M).
- Crank the engine.
- Wait for the STOP indicator to go out.
- Select a drive direction.
- Release the parking brake.
- Accelerate.
• Never forget that your vehicle is completely silent. As a result, pedestrians may be more easily surprised by its presence.
• When you leave your vehicle, even for a few seconds, apply the handbrake, set the drive selector to N or P and remove the key (there is no engine braking when stationary).
The STOP indicator stays lit until you crank the vehicle with the selector in N or P.
Return the selector to N or P, switch the ignition off and crank the vehicle again.
The vehicle's maximum speed is approximately 100 km/h on a flat road.
Do not drive through flooded roads. The water level must never exceed the bottom of the rim.
Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.