Renault Kangoo Quiz
Chassis

Boot

In this manual: Chassis
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
~1min read

It is MANDATORY to replace the bellows with a new one after any removal of an axial ball joint.

Fitting the bellows: Use a cone-shaped tool on the axial ball joint to avoid damaging the bellows during installation.

Apply grease to the bellows seat on the axial ball joint to prevent the bellows from twisting.

Secure the bellows with a new clamp (supplied with the bellows).

NOTE: it is MANDATORY to set the steering to the centre position to ensure air balance.

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.