Connectors: Connection

I - THREE-POSITION SWITCHES

II - STEERING WHEEL SWITCH

1. 1
   "Resume" button: 900 Ω
2. 2
   "0" button: approx. 0 Ω
3. 3
   "+" button: approx. 270 Ω
4. 4
   "-" button: approx. 100 Ω

Note: For removal of the steering wheel control, see Controls - signalling chapter, page

(R1) 900 Ω
(R2) 270 Ω
(R3) 100 Ω

III - ACCELERATOR PEDAL

• Track 1 resistance = 1700 Ω +/- 900
• Track 2 resistance = 3875 Ω +/- 1025

WARNING

To operate, the vehicle must have an accelerator pedal with a firm stop at the end of its travel.

IV - BRAKE SWITCH (DUAL)

The cruise control function uses the normally closed contact (shared with the brake lights). The normally open contact is supplied by the body control unit.

Both signals are compared by the injection ECU.

V - CLUTCH SWITCH

The clutch pedal has two switches and a potentiometer:

• an initial travel switch specific to the cruise control function (grey connector),
• an end of travel switch used for the keyless vehicle function (blue connector).

When fitting the switch, pull on the rod to take up the adjustment play.