Conformity check
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine off, ignition on.
MAIN ECU STATES AND PARAMETERS (EDC16 MEGANE VDIAG 44)
*IMA: Injector code learning routine.
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine off, ignition on.
AIR FLOW (TURBOCHARGING - INTAKE) (EDC16 MEGANE VDIAG 44)
*RCO: Duty Cycle
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine off, ignition on.
FUEL CIRCUIT - LPG (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine off, ignition on.
EMISSION CONTROL - OBD (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine off, ignition on.
COOLANT LOOP (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine off, ignition on.
DRIVER PARAMETERS (EDC16 MEGANE VDIAG 44)
(*) PEDAL VOLTAGES - COLD, ENGINE OFF, NO IGNITION (average values, for reference only).
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine off, ignition on.
HEATING (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine off, ignition on.
CRUISE CONTROL - SPEED LIMITER (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine off, ignition on.
CRUISE CONTROL - SPEED LIMITER (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine off, ignition on.
ENGINE COOLING (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine off, ignition on.
IGNITION - PREHEATING (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only. Execution condition: engine off, ignition on
STARTING (EDC16 MEGANE VDIAG 44)
PROTECTION (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine at idle.
MAIN ECU STATES AND PARAMETERS (EDC16 MEGANE VDIAG 44)
* IMA: Injector code learning routines
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine at idle.
AIR FLOW (TURBOCHARGING - INTAKE) (EDC16 MEGANE VDIAG 44)
* RCO: Duty Cycle
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine at idle.
FUEL CIRCUIT - LPG (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine at idle.
EMISSION CONTROL - OBD (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine at idle.
COOLANT LOOP (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine at idle
DRIVER PARAMETERS (EDC16 MEGANE VDIAG 44)
(*) PEDAL VOLTAGE (average values, for reference only).
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine at idle.
HEATING (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine at idle.
CRUISE CONTROL - SPEED LIMITER (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine at idle.
CRUISE CONTROL - SPEED LIMITER (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine at idle.
ENGINE COOLING (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine at idle.
IGNITION - PREHEATING (EDC16 MEGANE VDIAG 44)
INSTRUCTIONS
Only carry out this conformity check after a complete check with the diagnostic tool. The values given in this conformity check are for reference only.
Execution condition: engine at idle.
STARTING (EDC16 MEGANE VDIAG 44)
PROTECTION (EDC16 MEGANE VDIAG 44)
Summary table of states
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.