Electrical equipment
Rain and Light Sensor
In this manual: Electrical equipment
~1min read
- REMOVAL Remove the interior mirror cover.

- Unclip the two side clips (1) of the sensor using a small screwdriver.
- Disconnect the connector.
INSTALLATION
- Clean the windscreen using a wooden spatula (preferably).
The rain sensor must be refitted in perfectly clean conditions: any dust or cloth residue may cause a malfunction.
Do not touch the electronic part of the sensor. Fit it to the vehicle immediately after removing it from its packaging.

- When replacing the windscreen (keeping the rain and light sensor), the adhesive base (6) of the sensor must be replaced without fail (see Bodywork chapter).
- This part is available individually from the spare parts store.
- Position the sensor on the bracket.
- Clip the sensor onto the bracket.
- Reconnect the connector.
- Refit the mirror cover.
Test yourself
A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?