Recirculation motor

LEFT-HAND DRIVE

Tightening torques
battery cover screw	0.4 daN.m

REMOVAL

• Disconnect the battery, starting with the negative terminal.

Note: The recirculation motor is located at the top right of the air conditioning housing.

• Remove:

• the front sill trim (1) (upper part),
• the dashboard side panel (2).

• Unclip the passenger airbag deactivation switch (3).

• Remove the glovebox mounting screws (4).
• Remove the glovebox.

• Disconnect the motor (5).
• Remove:

• the three motor mounting screws (5), then remove it,
• the recirculation motor (5).

INSTALLATION

• Refit in the reverse order of removal.
• Turn the flap spindle with a suitable screwdriver to align the flap index with that of the motor.

WARNING

Connect the battery; carry out the necessary relearn procedures (Chapter Battery).

• Torque the battery cover screws (0.4 daN.m).

RIGHT-HAND DRIVE

Tightening torques
battery cover screw	0.4 daN.m

REMOVAL

• Disconnect the battery, starting with the negative terminal.

Note: The recirculation motor is located at the top right of the air conditioning housing.

• In the cabin:

• remove the dashboard (Interior Fittings chapter),
• remove the reinforcement crossmember (Upper Front Structure chapter).

• Disconnect the motor (1).
• Remove:

• the three motor mounting screws (1),
• the motor (1).

INSTALLATION

• Refit in the reverse order of removal.
• Turn the flap spindle with a suitable screwdriver to align the flap index with that of the motor.

WARNING

Connect the battery; carry out the necessary relearn procedures (Chapter Battery).

• Torque the battery cover screws (0.4 daN.m).