AVN Remote Control Repair Procedures

Inspection

1. 1
   Check the resistance between terminals at each switch position (LH).

   

   [LH: Audio + Hands-Free]

   Switch	Connector Terminal	Resistance (±5%)
   SEEK UP	2-5	430 ?
   SEEK DOWN		1.11 kΩ
   MODE		2.11 kΩ
   MUTE		3.11 kΩ
   VOL (+)		4.61 kΩ
   VOL (-)		6.81 kΩ
   Voice		10.71 kΩ
   SEND		18.91 kΩ
   END		40.91 kΩ

2. 2
   Check the resistance between terminals at each switch position (RH).

   

   [Right: Audio + Hands-Free]

   Switch	Connector Terminal	Resistance (±5%)
   Cancel	3-5	330 ?
   SET -		550 ?
   VOICE +		880 ?
   CRUISE ON/OFF		1.44 kΩ
   SCC (Smart Cruise Control)		5.54 kΩ
   GROUP	2-5	560 ?
   STEP		890 ?
   TRIP DOWN		1,45k?
   ENTER		2.55 kΩ

Removal

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the steering wheel assembly. (Refer to Steering System – Steering Wheel)
3. 3
   Remove the screw from the steering wheel cover.

   

4. 4
   Remove the steering column rear cover (A).

   

5. 5
   Disconnect the remote control connector on the steering wheel (A).

   

6. 6
   After loosening the screws, remove the steering remote control switch (A).

   

   

Installation

1. 1
   Install the steering wheel remote control after connecting the connector.
2. 2
   Connect the negative (-) battery terminal.